Archive

The full package, just install and go.This firmware updater allows you to identify and use the correct firmware for Universal Chargers or PowerSync chargers. It identifies the correct device connected and preloads the appropriate firmware.

This firmware-only file is provided as a standalone download for convenience if you only need the update file. If you have downloaded the latest version of Updater above, this firmware is already included in that download. This firmware is applicable to all chargers in the Universal Charging series of Cambrionix chargers such as the PowerPad15, ThunderSync2-16, U8 etc and can be used in conjunction with an older installation of Updater.

Firmware file only.Power Delivery Type-C Series. This firmware is provided as a standalone download for convenience if you only need the update file.If you have downloaded the latest version of Updater above, this firmware is already included in that download. This firmware is applicable to the PD4 charge and can be used in conjunction with an older installation of Updater.

Firmware file for the EtherSync USB hub.

The Cambrionix USB Limit Fix is a free application for Mac which can increase the number of USB devices which you can connect to a computer running MacOS.

This is particularly useful if you are required to manage batches of say 30/32/40/48 tablets at one time with Cambrionix products.

The USB Limit Fix is only required for certain Apple Mac computers which use the Intel Core i5 and Core i7 processors. These processors are also known by the Intel codename of ‘Haswell’.

The USB Limit Fix application will install the fix so that it is always enabled on every boot without the need to run the application. There is an option to uninstall the USB Limit Fix within the USB Limit Fix application itself.

ChaSync+ is a service for Apple computers to enable higher charging rates for iOS devices in sync mode when ChaSync is not enabled or supported (such as with the older 30 pin connector). For iOS devices with lightning or USB Type-C connectors, ChaSync will enable charging at up to 1.5A.

Disabling ChaSync and installing ChaSync+ will enable charging at up to 2.1A for iOS devices when in sync mode. Up to 2.1A charging is always available in charge mode for all iOS devices irrespective of ChaSync being in use or ChaSync+ being installed.